Expression Pattern and Polymorphism of Three Microsatellite Markers in the Porcine Ca3 Gene

– Carbonic anhydrase III (CA3) is an abundant muscle protein characteristic of adult type-1, slow-twitch, muscle fibres. In order to further understand the functions of the porcine CA3 protein in muscle, the temporal and spatial distributions of its gene product were analysed and the association between the presence of specific polymorphisms and carcass traits in the pig was also examined. Real-time PCR revealed that the CA3 mRNA expression showed no differences with age in skeletal muscles from Yorkshire pigs at postnatal day-1, month-2, and month-4. We provide the first evidence that CA3 is differentially expressed in the skeletal muscle of Yorkshire and Meishan pig breeds. In addition, the whole pig genomic DNA sequence of CA3 was investigated and shown to contain seven exons and six introns. Comparative sequencing of the gene from three pig breeds revealed the existence of microsatellite SJ160 in intron 5 and microsatellite SJ158 and a novel microsatellite marker that includes a tandem repeat of (TC) n in intron 4. We also determined the allele number and frequencies of the three loci in seven pig breeds and found that they are low polymorphic microsatellite markers. Statistical analysis showed that the CA3 microsatellite polymorphism was associated with dressing percentage, internal fat rate, carcass length, rib number and backfat thickness in the pig. pig / carbonic anhydrase III / expression pattern / microsatellite polymorphism 228 J. Wu et al.


INTRODUCTION
Carbonic anhydrase III (CA3) is a member of a gene family encoding proteins, which catalyse the hydration of CO 2 to generate protons and bicarbonate ions for cellular ion transport and pH homeostasis. It is an abundant muscle protein characteristic of adult type-1, slow-twitch, muscle fibres. The protein plays an important role in facilitated CO 2 diffusion and diverse processes involving H + and HCO − 3 transport [2]. Pig muscle carbonic anhydrase III is a 30 kDa protein displaying three activities i.e. CO 2 hydratase, acetate esterase and p-nitrophenyl phosphatase [10]. The CA3 gene was first isolated in man [8]. Studies have shown that the expression of the CA3 gene is strictly tissue-specific and is high in skeletal muscle and much lower in cardiac and smooth muscles [9]. The porcine CA3 gene has been assigned to pig chromosome SSC4q11-q12 [4]. Previously, we have reported the cDNA sequence of the porcine CA3 gene and polymorphic sites within this gene. Liu et al. [7] isolated the porcine CA3 gene by mRNA differential display in the longissimus dorsi muscle tissues from a Landrace × Large White cross-combination. Wang et al. [11] analysed temporal and spatial expression differences of the CA3 gene in the pig and reported that the CA3 protein is associated with intramuscular fat content and ham percentage.
In this study, we studied the allele frequencies of three microsatellite loci in the CA3 gene in seven pig breeds. We report the allele frequencies and the results of association analyses of the three microsatellite markers within the CA3 gene. Additionally, the expression patterns of the porcine CA3 gene during the porcine skeletal muscle development and in different pig breeds were analysed.

Analysis of CA3 expression levels
Total RNA was extracted using TRIzoL reagent (Invitrogen, Carlsbad, CA, USA) from the longissimus dorsi of Yorkshire pigs at postnatal day-1, month-2, and month-4 and Meishan pigs at postnatal month-2, respectively. Three animals were sampled for each breed and at each stage. Reverse transcriptase PCR was carried out using M-MLV Reverse Transcriptase (Promega, USA).
Amplification primer CA (Tab. I) was designed to analyse CA3 expression levels using porcine CA3 cDNA sequences (AY789514) as templates and Primer Express software. Quantitative PCR reactions were performed in 25 µL volumes containing 12.5 µL 2 SYBR Green Real-time PCR Master Mix (TOYOBO, Japan), 1 µL cDNA and 0.3 µM of a terminal concentration of each primer. PCR was run on the Applied Biosystems 7500 Real-Time PCR System. Fluorescent signals were continually monitored at the end of each PCR cycle comprising 1 min at 95 • C for the initial denaturing step, 15 s at 95 • C, 15 s at 60 • C and 50 s at 72 • C for a total of 40 cycles. The relative expression levels of the gene were analysed using the Comparative Ct method, in which glyceraldehyde-3-phosphate dehydrogenase (GAPDH) was used as an internal control, to correct for the differences in the mRNA quantities. A specific primer pair (GAPDH-1, see Tab. I) that amplified a 251 bp fragment was designed and the PCR conditions were identical to those described above. A t-test was performed to conclude on the significance of the differences observed.

Genomic DNA amplification and sequence analysis
The cDNA sequence of the pig CA3 gene was compared with the human and mouse orthologous mRNA and their genomic sequence in order to predict the genomic organisation of the pig gene, which was confirmed by PCR amplification and sequencing. Six primer pairs were designed to amplify the genomic sequence including all introns (Tab. I). Three genomic DNA mixture pools from three pig breeds (six Yorkshire pigs, six landrace pigs and six Meishan pigs) were used. PCR was performed in a 25 µL reaction mix containing the following: 200 ng of genomic DNA pool, 200 µM dNTP, 0.4 µmol of each PCR primer, and 1U Taq DNA polymerase in the reaction buffer supplied by the manufacturer. PCR was run as follows: 94 • C for 4 min, 35 cycles of 94 • C for 50 s, optimal temperature (Tab. I) for 50 s, 72 • C for 1 min 30 s and a final extension step at 72 • C for 10 min. The purified PCR products were cloned into the pGEM-T vector (TaKaRa, Dalian, China) and were sequenced using standard M13 primers. DNA sequences were compiled using the DNA star software (Madison, WI, USA). The sequencing results of different pig breeds were compared using BLAST (http://www.ncbi.nlm.nih.gov).

Detection of microsatellite polymorphisms
Based on the BLAST results of the whole genomic sequence of the pig CA3 gene in Yorkshire, Landrace and Meishan breeds, microsatellite SJ160 was identified in intron 5, and microsatellite SJ158 and a novel microsatellite marker that includes a tandem repeat of (TC) n were identified in intron 4. Primers SJ16 and SJ15, designed from the primer sequences of pig SJ160 (AB091132) and SJ158 (AB091130), were used to detect microsatellite SJ160 and SJ158 polymorphisms, respectively. Primer TC was designed from porcine CA3 DNA sequences and used to detect the polymorphism of the novel microsatellite (TC) n (Tab. I). PCR was performed in a 20 µL reaction mix containing the following: 25 ng of genomic DNA pool, 150 µM dNTP, 0.25 µmol of each PCR primer and 1 U Taq DNA polymerase in the reaction buffer supplied by the manufacturer. PCR was run as follows: 94 • C for 4 min, 30 cycles of 94 • C for 30 s, 55 • C for 30 s, 72 • C for 30 s and a final extension step at 72 • C for 10 min. The denatured PCR products were analysed on 12% polyacrylamide denaturing sequencing gels, which were stained in a AgNO 3 solution and then scanned by the Gel Imaging System (Olympia). To ensure the accuracy of the alleles analysed in our study, different samples of DNA alleles were cloned and sequenced.

Statistical analysis
Allele frequencies were studied in seven different pig populations. The microsatellite markers were genotyped in 330 F2 pigs of a Yorkshire × Meishan reference family. The association studies between genotype and carcass traits were performed with the least squares method (GLM procedure, SAS r version 8.0). The model used to analyse the data was assumed to be: where, Y ijk is the observation of the trait; µ is the least squares mean; G i is the effect of the ith genotype; S j is the effect of the j th sex (j = 1 for male or 2 for female); F k is the effect of year; b ijk is the regression coefficient of the slaughter weight and e ijk is the random residual.

Expression pattern of porcine CA3 gene
During the three stages of skeletal muscle development in Yorkshire pigs, we observed no statistically significant differences in CA3 mRNA expression ( Fig. 1) as shown by t-test analysis (P > 0.05). An expression pattern was also performed on the skeletal muscle of both Western Yorkshire and Chinese Meishan pigs at month-2. The porcine CA3 gene was differentially expressed in the skeletal muscle of Yorkshire and Meishan breeds (Fig. 2) with a higher level in the skeletal muscle of Meishan than that of Yorkshire pigs.

Genomic sequence analysis of porcine CA3 gene
The resulting overlapping PCR products were assembled into a single contig revealing the pig CA3 genomic sequence (Genbank accession number DQ675018). A 9589-bp genomic DNA sequence covering the entire coding region of porcine CA3 was amplified using six gene-specific primer pairs (Tab. I) and compared with the cDNA sequence to clarify the exon/intron organisation. The porcine CA3 gene is composed of seven exons and six introns. All splice donor and acceptor sites conform to the typical 5' GT-AG 3' rule. By comparing the sequence of these different pig breeds, we found that microsatellite SJ160 which includes a tandem repeat of (CA) n is located approximately at 431 bp from the beginning of intron 5. Microsatellite SJ158 which includes a tandem repeat of (GT) n is located approximately at 240 bp from the beginning of intron 4 and the novel microsatellite, which included a tandem repeat of (TC) n is located approximately at 1264 bp from the beginning of intron 4.

Allele frequencies in different pig breeds
We also studied the allele frequencies of the three microsatellite markers in seven pig breeds. For microsatellite marker SJ160, only two alleles were  detected with repeat numbers 9 and 22, for alleles A and B, respectively. Frequencies of both alleles differ between the two pig breed types, while allele A is fixed in three western commercial pig breeds, allele B is prevalent in Chinese indigenous pig breeds, with the exception of Exi pigs (Tab. II). For microsatellite marker SJ158, three alleles were detected with repeat numbers 18, 17 and 14, for alleles A, B and C, respectively. Allele B is prevalent in the two pig breed types, with the exception of Meishan pigs, in which allele C is fixed (Tab. III). For the novel microsatellite marker that includes a tandem repeat of (TC) n , three alleles were also detected in six pig breeds with repeat numbers 17, 13 and 12, for alleles A, B and C, respectively. Allele B is also prevalent in the two pig breed types, with the exception of Meishan pigs, in which allele A is prevalent (Tab. IV).

Association analysis of the three CA3 microsatellite polymorphisms
The results of the association analysis between the three CA3 microsatellite polymorphisms and carcass traits in 330 F 2 offspring (Yorkshire × Meishan) are given in Tables V, VI and VII. At the SJ160 locus, statistically significant Table IV. Allele frequencies of microsatellite marker CA3, which includes a tandem repeat (TC) n in six pig breeds.

Breed
Number  associations with carcass length, backfat thickness at the shoulder and backfat thickness at the buttock were found, but no significant conclusion could be drawn on other carcass traits. Pigs with the BB genotype had significantly higher carcass length and lower backfat thickness when compared with pigs with the AA or AB genotypes (Tab. V).
At the SJ158 locus, statistically significant associations with fat percentage, lean meat percentage, dressing percentage, internal fat rate, rib number, backfat thickness at the 6-7 th thorax and backfat thickness at the buttock were found, but no significant conclusion could be drawn on other carcass traits. Pigs with the AA genotype had the highest lean meat percentage and rib number, and the lowest fat percentage and dressing percentage, while pigs with the BC genotype had the highest fat percentage, internal fat rate and backfat thickness in comparison with pigs with other genotypes. Allele A present in Yorkshire pigs is associated with increased lean meat percentage and rib number, and decreased fat percentage (Tab. IV).
At the novel microsatellite (TC) n locus, statistically significant associations with dressing percentage, internal fat rate, carcass length, backfat thickness at the buttock and average backfat thickness were found, but no significant  conclusion could be drawn on other carcass traits. Pigs with the AA genotype had significantly higher dressing percentage and carcass length but lower internal fat rate and backfat thickness when compared to pigs with BB or AB genotypes (Tab. VII).

DISCUSSION
The real-time PCR technique is an accurate and sensitive method that has been widely used to determine the relative quantification of mRNA or DNA. In our current study, we employed this technique to assess the changes in the expression of CA3 mRNA during three important stages of skeletal muscle development in pig and different pig breeds. This provides some information on the functions of CA3 during muscle development. Liu et al. [7] first discovered that the porcine CA3 gene was differentially expressed in the skeletal muscle from a Landrace × Large White cross-combination. In our study, the porcine CA3 gene was also differentially expressed in the skeletal muscle of Yorkshire and Meishan pig breeds. The results of expression profiles showed that the expression levels of CA3 increased in skeletal muscles from prenatal 33-to 65-day-old Chinese Tongcheng pigs and subsequently decreased to a steady state in prenatal 90-day-old, postnatal 2-day-old, postnatal 28-dayold, and pregnant 65-day-old pigs [11]. Therefore, our results are supported by these former reports. We also observed that the CA3 mRNA expression does not change in the skeletal muscle from postnatal day 1 to 4-month-old Yorkshire pigs.
In our study, we isolated the whole genomic DNA sequence of the porcine CA3 gene and found that its structural features were identical to those reported by Wang et al. [11]. Moreover, we analysed the polymorphism of microsatellites present in the whole genomic DNA sequence of CA3. Previously, microsatellite markers SJ160, SJ158 and SJ159 (associated with the CA3 gene) were located at the position 46.9 cM on the SSC4 linkage map [3]. In our study on the pig CA3 gene representing about 10 kb, we identified only microsatellites SJ160, SJ158 and a novel microsatellite locus within introns but not the SJ159 locus. The presence of SSRs within introns has been documented in a number of species and they are mainly composed of monomers affecting gene transcription, mRNA correct splicing or export to the cytoplasm [6]. In animal breeding studies, microsatellite markers play an important role in constructing genetic maps, QTL mapping and in analysing the function of structural genes. We speculate that these microsatellites represent important markers both for fine QTL mapping of production traits and for the study of the expression of porcine CA3.
An assessment of the relationships between the CA3 functions and the characterisation of its genomic sequence, with its many polymorphisms and repeat elements, was also undertaken. Three microsatellite polymorphic sites were used to further analyse their relationships with important pig economic traits. Moreover, differences between the Chinese and western breeds were revealed by allele frequency analyses of the three microsatellite polymorphisms. Our findings show that the three polymorphic sites, SJ160, SJ158 and the novel microsatellite (TC) n , can be significantly associated with the following carcass traits i.e. carcass length, backfat thickness, dressing percentage, internal fat rate, lean meat percentage, etc. We observed a greater carcass quality in individuals with the BB genotype at the SJ160 locus and with the AA genotype at the (TC) n locus. However, since these genotypes are the most frequent in the Meishan breed, the observation of this gene effect is not consistent with known phenotype differences in this breed. It is possible that Meishan pigs have the favourable recessive allele at the two loci. However, the number of individuals analysed for allele frequencies and association is limited and the genetic background of the Yorkshire × Meishan reference family might influence the observed results and result in a discrepancy. In a previous study [12], we identified another polymorphic site in the CA3 gene, which is significantly associated with meat production traits i.e. backfat thickness, dressing percentage and lean meat percentage. Moreover, the porcine CA3 gene has been assigned to pig chromosome 4 (SSC4) at position 46.9 cM [3,4]. SSC4 encompasses several quantitative trait loci that are economically important in pig breeding. QTL for various carcass traits have been detected in the interval between V-ATPase and NGFB of chromosome 4 [1,5]. In the same F2 individuals (Yorkshire × Meishan), a QTL affecting backfat thickness was found at position 53 cM, between markers SW835 and SW752 [13]. Therefore, based on previous findings and our present results, the pig CA3 gene is located close to QTL affecting carcass traits and may be responsible for these QTL. It is also possible that the CA3 gene may be a candidate gene for fat traits of carcass that regulate skeletal muscle development and consequently affect commercial production traits in the pig.